Farallon Communications R9100 manual Configuring AppleTalk, EtherTalk setup

11-6 User’s Reference Guide

Configuring AppleTalk

AppleTalk setup for Netopia R9100s consists of configuring EtherTalk, LocalTalk, and AURP.

EtherTalk setup

In the System Configuration screen, select Network Protocols Setup and then select AppleTalk Setup. Select EtherTalk Phase ll Setup and press Return.

EtherTalk Phase II Setup
EtherTalk Phase II Enabled:	+---------	ET II Zone List----------	+
	+----------------------------------		+
Show Zones...	Unnamed
Enter New Zone Name:
Delete Zone Name...
Set Default Zone...
Net Low:
Net Hi:
Seeding...
	+----------------------------------		+

Up/Down Arrow Keys to select, ESC to dismiss.

■If you are using EtherTalk Phase ll on the Ethernet network connected to the Netopia R9100, select

EtherTalk Phase ll Enabled and toggle it to On.

■

■

To view the zones available to EtherTalk Phase ll, select Show Zones and press Return. You can dismiss the list of zones by pressing Return or Escape.

Select Enter New Zone Name to enter a new zone name.

Note: Your EtherTalk network number and zone name must match the values in use on the EtherTalk network.

If another router is already present on the EtherTalk network that you will be connecting to the Netopia R9100, use the zone names and network numbers used by that router for that EtherTalk network. Otherwise, your EtherTalk network may experience routing conflicts. The Netopia R9100 supports creating up to 32 zone names.

As an alternative, you can set EtherTalk seeding to soft seeding and let the Netopia R9100 receive the zone name and network number from the other router.

■To remove zones from the list, select Delete Zone Name and press Return to see the zones list. Use the Up and Down Arrow keys to select the zone to delete. Press Return to delete it and exit the list. Press Escape to exit the list without deleting any zones.

■Select Set Default Zone to choose a different default zone. This is the zone where the Netopia R9100’s