Farallon Communications R9100 manual Disconnect Telnet console session, Factory defaults

14-6 User’s Reference Guide

Disconnect Telnet console session

If you want to close your Telnet Console session, select Disconnect Telnet Console Session and press Return. A dialog box appears asking you to cancel or continue your selection.

	Utilities & Diagnostics
+------------------------------------------------------	+
+------------------------------------------------------	+

Are you sure you want to close this Console Session?

	CANCEL	CONTINUE
+------------------------------------------------------	X-Modem File Transfer...		+
	Revert to Factory Defaults...
	Restart System...

If you select Continue, you will immediately terminate your session.

Factory defaults

You can reset the Netopia R9100 to its factory default settings. In the Statistics & Diagnostics screen, select Revert to Factory Defaults and press Return. Select CONTINUE in the dialog box and press Return. The Netopia R9100 will reboot and its settings will return to the factory defaults, deleting your configurations.

In an emergency, you can also use the Reset switch to return the router to its factory default settings. Call Netopia Tech Support for instructions on using the Reset switch.

Note: Reset to factory defaults with caution. You will need to reconfigure all of your settings in the router.

Transferring configuration and firmware files with TFTP

Trivial File Transfer Protocol (TFTP) is a method of transferring data over an IP network. TFTP is a client-server application, with the router as the client. To use the Netopia R9100 as a TFTP client, a TFTP server must be available. Netopia, Inc. has a public access TFTP server on the Internet where you can obtain the latest firmware versions.

To use TFTP, select Trivial File Transfer Protocol (TFTP) in the Statistics & Diagnostics screen and press Return. The Trivial File Transfer Protocol (TFTP) screen appears.