Use & Care Manual
Model COGB ENGLISH
Burner Use Suggestions
Use the right front, right rear or left rear burners for simmering, or for cooking smaller quantities of food requiring small cookware. Use the left front POWER Burner for bringing liquids to a rapid boil, cooking large quantities of food, or for
The Burner Flames
Turn each burner on. Flames should be blue in color with no trace of yellow. The burner flames should not flutter or blow away from the burner. The inner cone of the flame should be between 1/2" and 3/4" long.
Super Sealed Surface Burners
IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.
Burner cap and gas spreader
Always keep the burner cap and gas spreader in place when using a surface burner. A clean burner cap and spreader will help prevent poor ignition and uneven flames. Always clean the part after a spillover and routinely remove and clean according to the "General Cleaning" section.
Burner base and injector
Gas must flow freely throughout the injector orifice to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the injector orifice opening.
Protect it during cleaning.
Be sure when lighting the burner:
•Gas spreader pin is properly aligned with burner base slot.
•Cap pin is properly aligned with gas spreader slot.
Burner ports
Check burner flames occasionally. A good flame is blue in colour, not yellow.
Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports.
To Clean gas burner:
IMPORTANT: Before cleaning, make sure all controls are off and cooktop are cool.
1.Remove the burner cap from the burner base and clean according to cleaning section.
2.Remove the burner spreader.
Clean the gas tube opening and burner port according to cleaning section.
3.Clean the burner base with a damp cloth (keep the gas injector area tree of cleaning agents and any other material from entering the injector orifice).
4.Replace the burner spreader and cap, making sure the alignment pins are properly aligned with the slots.
5.Turn on the burner.
If the burner does not light, check cap and spreader alignment. If the burner still does not light, do not service the gas burner yourself. Contact a trained repair specialist.
COOKTOP BURNER
003 | 004 |
|
8