OPERATION
Disconnect power switch must be in ON (I) position to operate shredder. Insert waste bag (Fellowes #36052) for easy disposal.
Continuous operation:
NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond
Set to (
) and plug in
PAPER
Press | Feed into paper entry |
and release
CARD/CD/3.5 DISK
Press | Hold card/CD/ | Feed into card/CD/3.5 |
| 3.5 disk at edge | disk entry and release |
Set to Off (
) and unplug
TROUBLESHOOTING
Paper jam: Set to Off ( 
Press and hold
Reverse (
)
) and empty bin. Replace bin and follow any or all of the below procedures. |
| Indicator lights: | ||
|
|
|
| Yellow - SafeSense® active |
|
|
|
| Yellow flashing - SafeSense® |
|
|
|
| not active |
Alternate slowly back and forth | Set to Off ( ) | Gently pull uncut | Press and hold | Make sure bin is pushed in |
| ||||
| and unplug | paper from paper | Reverse ( ) | Wait for motor to cool down |
|
| entry. Plug in. |
| |
|
|
|
| |
ATTENTION: If the SafeSense® light remains on, you must engage the 
Override Switch in order to perform steps above. Once the jam is cleared, reset the SafeSense® feature.
(See SafeSense® instructions below.)
SafeSense® paper jam: If the SafeSense® feature activates (SafeSense® light remains on) to cause the user | Sensor light | ||
|
| ||
to think the shredder has jammed when it has not, use the | Override Switch to deactivate the SafeSense® |
|
|
feature and clear the paper. Warning – when switch is in override position, the SafeSense® light will flash and |
|
| |
the SafeSense® feature will NOT function. Once the paper is cleared, reset the SafeSense® feature. | SafeSense® override switch | ||
|
| Active | Not active |
MAINTENANCE
Run regularly in reverse for one minute
Oil when bin is full, or immediately, if:
•Capacity decreases
•Motor sounds different, or
Shredder stops running
Follow oiling procedure below and repeat twice.
*Apply oil | Press Forward | Shred one sheet | Press and hold Reverse ( ) |
across entry |
|
|
*Only use a
WARRANTY
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of defects in material and workmanship and provides service and support for 2 years from the date of purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be free from defects in material and workmanship for 7 years from the date of purchase by the original consumer. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling, failure to comply with product usage standards, shredder operation using an improper power supply (other than listed on the label), or unauthorized repair. Fellowes reserves the right to charge the consumers for any additional
costs incurred by Fellowes to provide parts or services outside of the country where the shredder is initially sold by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. The duration, terms, and conditions of this warranty are valid worldwide, except where different limitations, restrictions, or conditions may be required by local law. For more details or to obtain service under this warranty, please contact us or your dealer.
3
