Fender G-DEC 30 manual DEC 30 Midi Configuration, GDEC30 Midi Controls, Amp Control

16 G-DEC 3O

G–DEC 30 MIDI Configuration

In Utility Mode you can set MIDI CONTROL (menu 9) to SYNTH or AMP. If set to AMP, data sent on MIDI channel 16 will control the amp, and channels 1-15 will be routed to the synth. This will present a problem if a normal MIDI song is played with music on channel 16 (which could affect the amp settings in unexpected ways). In this case you can either delete channel 16 or move it to a different channel. If MIDI CONTROL is set to SYNTH, all MIDI data will be routed to the synth. When

songs are created in the COMPOSE Mode, program changes will be saved in the song on channel 16 regardless of the MIDI Amp Control setting, but the program changes will only work during playback if the amp is set to AMP. MIDI on channel 16 is also passed from the MIDI input jack to the DSP during playback of songs or patterns if the MIDI CONTROL is set to AMP.

GDEC30 MIDI Controls

If the MIDI CONTROL is set to AMP the following commands can be used (on CH 16).

Amp Control	Control Type	Value Range
Preset Num	Program Change	0-99,127=Tuner
Amp Volume	CC#07	0-127
Synth Volume	CC#11	0-127
Start/Stop MIDI	CC#85	Don’t care
Play	CC#86	Don’t care (Ignored if the
		amp is busy playing a
		pattern or song)
Record	CC#87	Don’t care (Ignored if the
		amp is busy playing a
		pattern or song)
Overdub	CC#88	Don’t care (Ignored if the
		amp is busy playing a
		pattern or song)
Data Increment	CC#96	Don’t care
Data Decrement	CC#97	Don’t care
Amp Gain	CC#102	0-127
RVB Level	CC#108	0-127
FX Level	CC#110	0-127
FX Param1	CC#111	0-127
FX Param2	CC#112	0-127
FX Param3	CC#113	0-127
FX Param4	CC#114	0-127
Select Song	CC#119	0-63 (Ignored if the amp
		is busy playing a pattern
		or song)

fender.com