![](/images/new-backgrounds/1294073/29407313x1.webp)
To set the delay interval of delay effects using TAP:
1.Select a preset with a delay effect
2.Press the TAP button repeatedly (twice minimum) in sync with the desired delay interval.
♫If you press the TAP button only one time, the delay interval will be set to the maximum length.
To set the tempo of MIDI tracks using TAP:
1.Select a preset with a MIDI band track
2.Activate the Band Tempo menu. (See Band Menus on page 7.)
3.Press the TAP button repeatedly (twice minimum) in sync with the desired tempo for the band track.
♫If you press the TAP button only one time, the tempo set- ting of the MIDI band track will not be affected.
Tuner Button
The
To use the tuner:
1.Press and hold the TAP button for 2 seconds.
2.Strike any single string on your guitar and watch the tuner screen on the
Note of string played
Tuning needle
3.Turn the tuning peg on your guitar until the tuning needle on screen indicates the string is in tune, as shown above.
♫You can also activate the Tuner from a Fender
4.Standard guitar tuning is as follows:
5.Press any button on the
Band menus
Use the Band menus to select a new band track for the current preset and adjust all band track settings, or to import the band track (will all settings) from another
preset.
Band Track Selection
To select a new band track:
1.Press the BAND
2.The first menu is Band Type. Here you can select either MP3/WAV
♫Select MP3/WAV as the Band Type for the best results in most instances. MIDI is more useful for specialized pur- poses such as generating metronome clicks.
3.Press the FILE
4.Turn the big knob to select a new band track.
♫Turning the big knob will scroll through all the band tracks on the
5.Press EXIT.
♫The SAVE button will turn red to indicate a change to the current preset. To reset the band track, simply turn the big knob to a different preset and then back again.