![](/images/new-backgrounds/1111066/111066353x1.webp)
Removal and Replacement Procedures
✎Steps 7 and 8 apply only to HP Compaq nx4820 and Compaq Presario V2400 models.
7.Release the ZIF connector 1 to which the LED board cable is connected and disconnect the cable 2 from the system board.
8.Remove the four silver PM2.0×5.0 screws 3 that secure the system board to the top cover.
Disconnecting the LED Board Cable and Removing the System Board Screws, HP Compaq nx4820 and Compaq Presario V2400 models Only
Maintenance and Service Guide |