| Page 28 of 31 |
OFFSET
DESCRIPTION
0Number of Read Table messages sent
1Number of Read Variable messages sent
2Number of Write Table messages sent
3Number of Write Var Messages sent
4Number of bytes sent by client driver
5Number of messages sent by client
6Number of response messages received by client
7
Number of times client tries write with alternate format because original method failed
9 Most recent response error
8Number of times client receives an error response
10 Carrier Error: #1 Invalid Command"
11 Carrier Error: #2 Invalid or
12 Carrier Error: #3 Level II communications Error"
13 Carrier Error: #4 Error not defined"
14 Carrier Error: #5 Error not defined"
15 Carrier Error: #6 Device Not Configured"
16 Carrier Error: #7 Variable Does not Exist"
17 Carrier Error: #8 Invalid Data"
18 Carrier Error: #9 Access Restricted"
19 Carrier Error: #10 Limits Exceeded"
20 Carrier Error: #11 Alarms not Available"
21 Carrier Error: #12 Cannot Force Variable"
22 Carrier Error: #13 Parameter Not Found"
23 Carrier Error: #14 Level II Communications NACK"
24 Some other error
25 Number of response bytes received by client
26Number of times client has timeout out waiting for (response) prompt When set then the server sends response whose var names have leading
27spaces. This is used for QAA testing and diagnostic purposes only. Customers should never set this value.
28Number of times client cannot parse / recognize the value sting in a response
29Number of times the server had to store a time greater than 24:00
30Number of times the client sent a message with a time greater than 24:00
31 | Number of times the client sent a message to a probable occupancy table | |
without the correct data types | ||
|
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)
