FS-8704-09 SNMP Driver Manual

Page 22 of 39

Appendix A.3. MIB File Generation for the SNMP Server/Agent

It is necessary to create an updated MIB file corresponding to the available Data Arrays and Traps configured in the Server configuration (*.csv) file. To create this MIB file, run the mb8sim.exe utility supplied with the FieldServer in a DOS command window as follows:

mb8sim –cmy_config.csv

where my_config.csv is the newly created configuration file.

hit ‘Q’ to quit. The program will have created a file called FServer.MIB, which may be compiled into the SNMP Management application of choice.

When the MIB File is created the driver prints a message to the Error log.

The “MIB_Style” parameter specified in Section 4.3 provides three options for creating the MIB file.

Standard - this is the same as omitting the parameter

NuDesign the MIB file produced is suitable for compilation by the NuDesign Browser.

Custom - the file MIBhead.ini is used in preparing the MIB file.

Adapters

Adapter, Protocol, MIB_Style

N1, SNMP, Standard

NuDesign

Custom

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 9042 Toll Free: (888) 509 1970 email: support@fieldserver.com

Page 22
Image 22
FieldServer FS-8704-09 SNMP instruction manual