| Page 5 of 39 |
3.Hardware Connections
The FieldServer is connected to the Ethernet using the UTP cable supplied. Two typical hardware configurations are shown below:
1. FieldServer as SNMP Agent (Server)
Network Management
Station
FieldServer SNMP
Agent/Server
TCP/IP Cloud
3rd Party Nodes 
(non-SNMP)
2. FieldServer as SNMP Client
SCADA
(3rd Party Client)
| Managed Nodes |
TCP/IP Cloud | (SNMP Agents) |
FieldServer
(SNMP Client)
3.1.Hardware Connection Tips / Hints
The FieldServer utility program Ruinet will connect to the FieldServer even if the Netmask setting on the PC differs from the setting on the FieldServer. SNMP will only work between Nodes for which these settings correspond, however, thus all Nodes required to communicate using SNMP must have the same Netmask setting.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 9042 Toll Free: (888) 509 1970 email: support@fieldserver.com
