Installation of Optional Accessories

OPTIONAL DIGITAL SIGNAL PROCESSING UNIT DSP-2

The DSP-2is a highly-effective filtering technology which can dramatically improve re- ception and transmission.

1.Turn the transceiver’s power off by pressing and holding in the POWER switch for one second, then disconnect the DC cable from the INPUT jack on the rear panel of the transceiver.

2.Referring to Figure 1, remove the seven screws affixing the top cover of the transceiver then disconnect the speaker’s connector from the MAIN Unit.

3.Refer to Figure 2, locate the empty 16-pin connector, and connect the DSP-2 here.

4.Move the small switch which is located beside the 16-pin connector to the “D” position.

5.Replace the top cover and its seven screws (remember to replace the internal speaker’s plug).

6.DSP-2installation is now complete. Connect the DC cable to the INPUT jack.

DSP-2

DSP

MODE

TX/BUSY	DWN	UP
		BAND

MAIN UNIT

DSP-2

Mounting Location

Small Switch

DSP	DWN	UP
TX/BUSY	DWN	UP
MODE
		BAND

Figure 1

Figure 2

FT-857 Operating Manual

119

FT-857 specifications

The Vertex Standard FT-857 is a compact and versatile all-mode transceiver that has become popular among amateur radio operators since its introduction. With its ability to operate in VHF, UHF, and HF bands, the FT-857 caters to a diverse range of communication preferences and provides exceptional performance for both mobile and base station applications.

One of the key features of the FT-857 is its coverage of a broad frequency range, spanning from 160 meters to 2 meters and covering the 70 cm band. This wide frequency coverage allows amateur operators to communicate with fellow enthusiasts across various bands, ensuring versatility in operational environments. The FT-857 offers an output power of up to 100 watts on HF and 50 watts on VHF/UHF, providing sufficient power for effective communication, whether in local or distant contacts.

Another distinctive characteristic of the FT-857 is its all-mode capability. It supports various modes of operation, including SSB, CW, AM, and FM, making it suitable for different operating styles and preferences. The inclusion of advanced digital signal processing (DSP) technology enhances audio clarity and offers noise reduction features, which are crucial in crowded bands. This DSP capability also aids in improving signal quality and overall communication experience.

Portability is a significant advantage of the FT-857. Its compact size and lightweight design make it an excellent choice for field operations and portable setups. Additionally, the transceiver is well-equipped with features such as built-in memory channels, allowing users to save and quickly access frequently used frequencies. The FT-857 also includes a built-in automatic antenna tuner, which makes it easier for operators to set up and optimize their antenna configurations without requiring additional external devices.

The FT-857 is designed with user-friendly controls and a clear LCD display, enabling operators to quickly adjust settings and monitor communication details without confusion. The visibility of the display is especially vital for use in different lighting conditions, ensuring that users can operate efficiently whether in bright sunlight or low light conditions.

In summary, the Vertex Standard FT-857 is a highly capable, compact transceiver that offers an effective solution for amateur radio communication. With its all-band, all-mode capabilities, robust DSP technology, and user-friendly design, the FT-857 remains a popular choice for both enthusiasts and professionals alike, facilitating engaging communication experiences across multiple bands and modes.

Vertex Standard FT-857 manual Installation of Optional Accessories

Models: FT-857

INSTALLATION OF OPTIONAL ACCESSORIES

OPTIONAL DIGITAL SIGNAL PROCESSING UNIT DSP-2

FT-857 specifications