MENU OPERATION

The Menu System allows you to customize a wide variety of transceiver performance as- pects and operating characteristics. Once you have gone through the various Menu customization procedures initially, you will find that you will not have to resort to them frequently during everyday operation.

MENU OPERATION

1.

Press and hold in the [FUNC] key for one second. The Menu Item number and a title for

 

the Menu Mode will appear in the display.

SELECT

 

2.

Rotate the SELECT knob to select the Menu Item

 

 

 

you wish to work on.

 

 

3.

When you have chosen the desired Menu Item num-

 

 

 

ber, rotate the DIAL knob to change the value or

 

 

 

condition for the Menu Item.

 

 

4.

When you have made your selection, press and hold

[FUNC]

DIAL

 

in the [FUNC] key for one second to save the new setting and exit to the normal operation.

1) In step 3 above, if you press the [HOME] key momentarily, it will reset the setting of that Menu Item to its factory-default value.

2)In step 4 above, if you press and hold the [C] key for one second, you will exit to normal operation without saving the new setting.

3)In step 2 above, press the [A] key momentarily, The “hyphen” in the Menu channel number will change to become a “dot;” this indicates that this Menu item will be masked from the viewable Menu list when Menu No-001 (EXT MENU) is set to “Off.”

No

Menu Item

Function

Available Values

Default

001

EXT MENU

Enables/Disables the extended Menu Mode.

ON/OFF

OFF

002

144MHz ARS

Activates/deactivates the Automatic Repeater Shift

ON/OFF

ø1

 

 

feature when operating on the 144 MHz band.

 

 

003

430MHz ARS

Activates/deactivates the Automatic Repeater Shift

ON/OFF

ø1

 

 

feature when operating on the 430 MHz band.

 

 

004

AM&FM DIAL

Enabling/disabling the DIAL knob on the AM and

ENABLE/DISABLE

DISABLE

 

 

FM modes.

 

 

005

AM MIC GAIN

Adjusts the microphone gain level for the AM

0 ~ 100

50

 

 

mode.

 

 

006

AM STEP

Selects the tuning steps for the MEM/VFO CH

2.5/5/9/10/12.5/25kHz

ø1

 

 

knob on the AM mode.

 

 

007

APO TIME

Selects the Auto Power Off time (time before power

OFF/1h ~ 6h

OFF

 

 

goes off).

 

 

008

ARTS BEEP

Selects the ARTS beep mode.

OFF/RANGE/ALL

RANGE

009

ARTS ID

Enables/disables the CW identifier during ARTS

ON/OFF

OFF

 

 

operation.

 

 

010

ARTS IDW

Stores your callsign into the CW identifier.

–

YAESU

011

BEACON TEXT 1

Stores the message for the Beacon.

–

–

012

BEACON TIME

Selects the interval time (between message and

OFF/

OFF

 

 

message).

1 sec ~ 255sec

 

013

BEEP TONE

Selects the beep frequency.

440/880/1760 Hz

880Hz

014

BEEP VOL

Selects the beep volume level.

0 ~ 100

50

015

CAR LSB R

Sets the Rx Carrier Point for LSB.

–300 ~ +300 Hz

0 Hz

016

CAR LSB T

Sets the Tx Carrier Point for LSB

–300 ~ +300 Hz

0 Hz

017

CAR USB R

Sets the Rx Carrier Point for USB

–300 ~ +300 Hz

0 Hz

018

CAR USB T

Sets the Tx Carrier Point for USB

–300 ~ +300 Hz

0 Hz

019

CAT RATE

Sets the transceiver’s circuitry for the CAT baud

4800 bps/9600 bps/

4800bps

 

 

rate to be used.

38400 bps

 

94

FT-857 Operating Manual

Page 95 Page 97
Page 96
Image 96
Vertex Standard FT-857 manual Menu Operation
Page 95 Page 97

FT-857 specifications

The Vertex Standard FT-857 is a compact and versatile all-mode transceiver that has become popular among amateur radio operators since its introduction. With its ability to operate in VHF, UHF, and HF bands, the FT-857 caters to a diverse range of communication preferences and provides exceptional performance for both mobile and base station applications.

One of the key features of the FT-857 is its coverage of a broad frequency range, spanning from 160 meters to 2 meters and covering the 70 cm band. This wide frequency coverage allows amateur operators to communicate with fellow enthusiasts across various bands, ensuring versatility in operational environments. The FT-857 offers an output power of up to 100 watts on HF and 50 watts on VHF/UHF, providing sufficient power for effective communication, whether in local or distant contacts.

Another distinctive characteristic of the FT-857 is its all-mode capability. It supports various modes of operation, including SSB, CW, AM, and FM, making it suitable for different operating styles and preferences. The inclusion of advanced digital signal processing (DSP) technology enhances audio clarity and offers noise reduction features, which are crucial in crowded bands. This DSP capability also aids in improving signal quality and overall communication experience.

Portability is a significant advantage of the FT-857. Its compact size and lightweight design make it an excellent choice for field operations and portable setups. Additionally, the transceiver is well-equipped with features such as built-in memory channels, allowing users to save and quickly access frequently used frequencies. The FT-857 also includes a built-in automatic antenna tuner, which makes it easier for operators to set up and optimize their antenna configurations without requiring additional external devices.

The FT-857 is designed with user-friendly controls and a clear LCD display, enabling operators to quickly adjust settings and monitor communication details without confusion. The visibility of the display is especially vital for use in different lighting conditions, ensuring that users can operate efficiently whether in bright sunlight or low light conditions.

In summary, the Vertex Standard FT-857 is a highly capable, compact transceiver that offers an effective solution for amateur radio communication. With its all-band, all-mode capabilities, robust DSP technology, and user-friendly design, the FT-857 remains a popular choice for both enthusiasts and professionals alike, facilitating engaging communication experiences across multiple bands and modes.
Top Page Image Contents