[Distination Radio]
[Source Radio]

CLONING

You can transfer all data stored in one transceiver to another set by utilizing the handy “Cloning” feature. This requires a user-constructed cloning cable which connects the CAT/ LINEAR jacks on the two transceivers, as shown below.

To clone from one transceiver to another, use the following procedure:

1.Insert the Clone Cable into the CAT/LINEAR jack of each transceiver.

2.Turn both transceivers off, then press and hold in the [MODE(t)] and [MODE(u)] buttons on each radio while turning the power on again. The “CLONE MODE” notation will appear on the display.

3. On the “destination” radio, press the [A](RCV) key.

4. Now, on the “source” radio, press the [C](SEND) key. Data will now be transferred to the “Destination” radio from the “Source” radio.

5. If there is a problem during the cloning process, “Error” will be blinked. Check your cable connections and try again.

6. If cloning is successful, turn the “destination” radio off. Now turn the “source” radio off.

7. Remove the clone cable. Channel and operating data for both radios are now identical. They both may be turned on now for normal operation.

TX D

 

TX D

RX D

RX D

GND

 

GND

CAT/LINEAR

 

CAT/LINEAR

118

FT-857 Operating Manual

Page 119 Page 121
Page 120
Image 120
Vertex Standard FT-857 manual Cloning
Page 119 Page 121

FT-857 specifications

The Vertex Standard FT-857 is a compact and versatile all-mode transceiver that has become popular among amateur radio operators since its introduction. With its ability to operate in VHF, UHF, and HF bands, the FT-857 caters to a diverse range of communication preferences and provides exceptional performance for both mobile and base station applications.

One of the key features of the FT-857 is its coverage of a broad frequency range, spanning from 160 meters to 2 meters and covering the 70 cm band. This wide frequency coverage allows amateur operators to communicate with fellow enthusiasts across various bands, ensuring versatility in operational environments. The FT-857 offers an output power of up to 100 watts on HF and 50 watts on VHF/UHF, providing sufficient power for effective communication, whether in local or distant contacts.

Another distinctive characteristic of the FT-857 is its all-mode capability. It supports various modes of operation, including SSB, CW, AM, and FM, making it suitable for different operating styles and preferences. The inclusion of advanced digital signal processing (DSP) technology enhances audio clarity and offers noise reduction features, which are crucial in crowded bands. This DSP capability also aids in improving signal quality and overall communication experience.

Portability is a significant advantage of the FT-857. Its compact size and lightweight design make it an excellent choice for field operations and portable setups. Additionally, the transceiver is well-equipped with features such as built-in memory channels, allowing users to save and quickly access frequently used frequencies. The FT-857 also includes a built-in automatic antenna tuner, which makes it easier for operators to set up and optimize their antenna configurations without requiring additional external devices.

The FT-857 is designed with user-friendly controls and a clear LCD display, enabling operators to quickly adjust settings and monitor communication details without confusion. The visibility of the display is especially vital for use in different lighting conditions, ensuring that users can operate efficiently whether in bright sunlight or low light conditions.

In summary, the Vertex Standard FT-857 is a highly capable, compact transceiver that offers an effective solution for amateur radio communication. With its all-band, all-mode capabilities, robust DSP technology, and user-friendly design, the FT-857 remains a popular choice for both enthusiasts and professionals alike, facilitating engaging communication experiences across multiple bands and modes.
Top Page Image Contents