Vertex Standard FT-857 manual Scanning Operation

SCANNING OPERATION

SCANNING OPERATION

5.Initiate memory scanning; you will observe that the channels you marked to be skipped are not included in the scanning loop.

6.Press the PTT switch to stop the scan; you may now use the SELECT knob to step through the channels manually - one at a time - and you will observe that the “Skipped” channels are, nonetheless, available for recall by manual means.

7.You may restore a previously-skipped channel to the scanning loop by selecting the channel manually, then pressing the [B](SKIP) key momentarily so that the “dot” changes to become a “hyphen.”

It is not possible to Skip Memory Channel M-001 (the Priority Channel). See the next chapter for details on Priority operation.

84 FT-857 Operating Manual