INSTALLATION

ELECTROMAGNETIC COMPATIBILITY

If this transceiver is used with, or in the vicinity of, a computer or computer-driven accesso- ries, you may need to experiment with grounding and/or Radio Frequency Interference (RFI) suppression devices (such as ferrite cores) to minimize interference to your communications caused by energy from the computer. Computer-generated RFI is usually a result of inad- equate shielding of the computer’s cabinet or I/O and peripheral connections. While com- puter equipment may “comply” with RF emission standards, this does not ensure that sensi- tive Amateur Radio receivers like the FT-857will not experience interference from the device!

Be certain to use only shielded cables for TNC-to-Transceiver connections. You may need to install AC line filters on the power cord(s) of the suspected equipment, and decoupling ferrite toroidal chokes may be required on interconnecting patch/data cables. As a last re- sort, you can try installing additional shielding within the computer’s case, using appropri- ate conductive mesh or conductive shielding tape. Especially check “RF holes” where plas- tic is used for cabinet front panels.

For further information, consult amateur radio reference guides and publications relating to RFI suppression techniques.

HEAT AND VENTILATION

To ensure long life of the components, be certain to provide adequate ventilation around the cabinet of the FT-857. The cooling system of the transceiver must be free to draw cool air in from the side of the transceiver and expel warm air from the rear of the transceiver.

Do not install the transceiver on top of another heat-generating device (such as a linear amplifier), and do not place equipment, books, or papers on top of the transceiver. Place the transceiver on a hard, flat, stable surface. Avoid heating vents and window locations that could expose the transceiver to excessive direct sunlight, especially in hot climates.

Heat

Water & Moisture

Dust

Ventilation

FT-857 Operating Manual

15

Page 17
Image 17
Vertex Standard FT-857 manual Electromagnetic Compatibility, Heat and Ventilation

FT-857 specifications

The Vertex Standard FT-857 is a compact and versatile all-mode transceiver that has become popular among amateur radio operators since its introduction. With its ability to operate in VHF, UHF, and HF bands, the FT-857 caters to a diverse range of communication preferences and provides exceptional performance for both mobile and base station applications.

One of the key features of the FT-857 is its coverage of a broad frequency range, spanning from 160 meters to 2 meters and covering the 70 cm band. This wide frequency coverage allows amateur operators to communicate with fellow enthusiasts across various bands, ensuring versatility in operational environments. The FT-857 offers an output power of up to 100 watts on HF and 50 watts on VHF/UHF, providing sufficient power for effective communication, whether in local or distant contacts.

Another distinctive characteristic of the FT-857 is its all-mode capability. It supports various modes of operation, including SSB, CW, AM, and FM, making it suitable for different operating styles and preferences. The inclusion of advanced digital signal processing (DSP) technology enhances audio clarity and offers noise reduction features, which are crucial in crowded bands. This DSP capability also aids in improving signal quality and overall communication experience.

Portability is a significant advantage of the FT-857. Its compact size and lightweight design make it an excellent choice for field operations and portable setups. Additionally, the transceiver is well-equipped with features such as built-in memory channels, allowing users to save and quickly access frequently used frequencies. The FT-857 also includes a built-in automatic antenna tuner, which makes it easier for operators to set up and optimize their antenna configurations without requiring additional external devices.

The FT-857 is designed with user-friendly controls and a clear LCD display, enabling operators to quickly adjust settings and monitor communication details without confusion. The visibility of the display is especially vital for use in different lighting conditions, ensuring that users can operate efficiently whether in bright sunlight or low light conditions.

In summary, the Vertex Standard FT-857 is a highly capable, compact transceiver that offers an effective solution for amateur radio communication. With its all-band, all-mode capabilities, robust DSP technology, and user-friendly design, the FT-857 remains a popular choice for both enthusiasts and professionals alike, facilitating engaging communication experiences across multiple bands and modes.