![Speaker fall prevention measures](/images/new-backgrounds/11726/1172631x1.webp)
Press into the groove.
Back of the speaker base
Pull the cable straight along the line and slide into the groove.
≥Be sure to insert the cable in under the projecting part.
≥Place the speaker that is connected with the speaker cable with a red connector on the observers’ right, and connect with the speaker cable with a white connector on the observers’ left.
Speaker fall prevention measures
To prevent the speakers from falling, it is recommended, as an additional protection measure, to attach the speakers to the wall or table with a fall prevention cord (hereafter “cord”).
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support (> 11, 13). Improper attachment may result in damage to the wall and speakers, and personal injury.
≥Use a cord of less than ‰1.5 mm (1/16q), which is capable of supporting over 10 kg (22.05 lbs).
≥Keep the screws out of reach of children to prevent swallowing.
≥Make sure that the slack of the cord is minimal.
When placing the speakers on a wall
Horizontal placement
B
A
C
A
C
Vertical placement
B
A
C
D
A
C
16
VQT4D53
A | Cord (not supplied) | C | Wall |
B | Screw eye (not supplied) | D | TV |