Place the speakers using the speaker bases
∏ | 1 | Speaker (L) | ∏ | 1 | Speaker (R) | ∏ | 2 | Speaker cables |
|
|
|
|
|
|
|
| (L): WHITE |
|
|
|
|
|
|
|
| (R): RED |
∏ | 2 | Speaker bases | ∏ | 6 | Screws | ∏ | 2 | Front ornaments |
≥For a safety measure to prevent the speakers from falling, refer to page 16.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following step 1 of “Place the speakers vertically” (> 12)
Assemble the speakers.
≥To make sure that the speaker cable is connected to the correct speaker, match the color of the speaker connector with the color of the L/R indicator on the speaker label so as not to connect the speaker cable to the wrong speaker.
≥Be sure to insert the speaker cable through the threading hole as indicated in the illustration.
≥Keep the screws out of reach of children to prevent swallowing.
Screw
≥ Tighten securely.
Insert the wire fully while pushing the lever.
r: White
s: Blue line
Align the projecting parts with the holes on the speaker.
Push
Thread the speaker cable.
To detach the speaker.
Getting started
2
1
≥Insert the wire fully, taking care not to insert beyond the wire insulation.
(Continued on the next page) 15 VQT4D53
