Panasonic SC-HTB20 owner manual Using this unit, Press Í to turn on the system, Press Mute

Using this unit

Preparation

≥Turn on the TV.

Press [Í] to turn on the system.

Select the source. (> 6)

Press	To select
[TV]	“TV”
[BD/DVD]	“BD/DVD”
[AUX]	“AUX”

≥This remote control cannot be used to control the operations of the connected devices.

∫When “BD/DVD” or “AUX” is selected

as the source

On the connected device:

Select the TV’s input for this unit and start the playback on the connected device.

Press [i VOL j] to adjust the volume of the speakers.

≥Volume range: 1 to 100§

Press [i SUBWOOFER j] to adjust the subwoofer level (bass sound).

≥ Subwoofer levels: 1 to 4§ (Factory preset: 3)

1Press [i SUBWOOFER j] to display the current level.

2While the level is displayed:

Press [i SUBWOOFER j] to adjust the level.

Indication	Effect level
4	Highest

3

2

1 Lowest

§The audio format indicators blink from left to right (i) or from right to left (s) while adjusting the speaker volume or the subwoofer level.The indicators will not blink when it has reached the maximum or minimum.

Getting started

Operations

If the system does not operate as expected, such as sound defects, return the settings to the factory preset and operate the system again. (> 26)

∫To mute the sound

Press [MUTE].

The audio format indicators blink simultaneously while muting.

≥To cancel, press the button again or adjust the volume.

≥Muting is canceled if this system is turned off.

≥If there is sound from the TV’s speakers too, then use the TV’s remote control to lower the volume to minimum.

≥The maximum volume of the TV and this system may be different.

≥If this system is turned off with the volume setting in the greater half (above 50), this system will automatically lower the volume to the middle (50) when the system is turned on. (Refer to page 26 to turn this function off.)

21

VQT4D53