Indicator illumination
The indicators display the condition of this system by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Refer to “Troubleshooting” (> 26) if the indicators do not light as illustrated below.
Indicator
Description
The indicators blink from left to right (i) or from right to left (s).
≥When the speaker volume, the subwoofer level, or dialog effect level is adjusted (> 21, 22)
The indicators blink simultaneously.
≥When “MUTE” is on (> 21)
The indicator blinks for 10 sec.
≥When the audio output mode is
≥When 3D surround effect and
≥When the dual audio setting is Main (> 25)
≥When the auto gain control is on (> 25)
≥When the subwoofer level or the dialog effect level is 1 (> 21, 22)
The indicator blinks for 10 sec.
≥When the audio output mode is Auto mode (> 23)
≥When the subwoofer level or the dialog effect level is 2 (> 21, 22)
The indicator blinks for 10 sec.
≥When the audio output mode is Auto mode (> 23)
The indicator blinks for 10 sec.
≥When the subwoofer level or the dialog effect level is 3 (> 21, 22)
The indicator blinks for 10 sec.
≥When the audio output mode is 2ch mode (> 23)
≥When 3D surround effect and
≥When the dual audio setting is Secondary (SAP: Secondary Audio Program) (> 25)
≥When the auto gain control is off (> 25)
≥When the subwoofer level or the dialog effect level is 4 (> 21, 22)
The indicators blink for 10 sec.
≥When the dual audio setting is Main and Secondary (> 25)
The indicators blink for 10 sec.
≥When the remote control code is changed (> 25)
The indicators blink once.
≥When changing the setting (“To reduce the
§The selected source indicator will also light.
28
VQT4D53
