Panasonic SC-HTB20 Unit care, Remote control, To replace a button-typebattery, Before use

Remote control

1 5

2

6

7

3 8

1Turn the system on or off (> 21)

2Adjust the dialog effect level (> 22)

3Select the TV as the source (> 21)

4Select the BD/DVD as the source (> 21)

5Adjust the output level of the active subwoofer (bass sound) (> 21)

6Adjust the volume of the speakers (> 21)

7Mute the sound (> 21)

8Select the AUX as the source (> 21)

Remove the insulation sheet A before using.

∫To replace a button-type battery

1 While pressing the stopper B, pull out the battery holder.

2Set the button-type battery with its (i) mark facing upward and then put the battery holder back in place.

≥When replacing the battery, use: CR2025 (Lithium battery)

≥Keep the button-type battery out of reach of children to prevent swallowing.

Before use

Unit care

∫Clean the system with a soft, dry cloth

≥When the system becomes very dirty, wring a cloth moistened in water tightly to wipe the dirt, and then wipe it with a dry cloth.

≥When cleaning the system, use a fine cloth. Do not use tissues or other materials (towels, etc.) that can fall apart. Small grains may get stuck inside the speaker cover.

≥Never use alcohol, paint thinner or benzine to clean the system.

≥Before using chemically-treated cloth, carefully read the instructions that came with the cloth.

7

VQT4D53