| Page 3 of 39 |
1.SNMP Description
The SNMP driver allows the FieldServer to transfer data to and from devices over Ethernet using the SNMP version 1 protocol. The FieldServer can emulate either a Server (SNMP Agent) or Client.
Max Nodes Supported:
FieldServer Mode | Nodes | Comments |
Client | 25 | Each Node is specified by a unique IP address |
Server | 1 | As a Server the SNMP driver can act as a single Node only |
The Client can be configured to read values specified by their SNMP Object Identifiers (OID’s), which are defined in the MIB file (Management Information Base) of the target device. When acting as an SNMP Agent (Server), the driver makes the contents of specified integer data arrays available to any SNMP Client. The FieldServer MIB file sets out the OIDs to use.
The current version of the driver can send and receive SNMP traps. The following SNMP data types are supported:
•INTEGER
•OCTET_STREAM
•TIMER_TICKS
•STRING
The maximum number of traps currently supported is 255.
The FieldServer Enterprise ID is 6347. MIB files are generated automatically from the FieldServer configuration files. A selection of standard
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 9042 Toll Free: (888) 509 1970 email: support@fieldserver.com
