FS-8704-09 SNMP Driver Manual

Page 12 of 39

5.2.Server Side Connection Descriptors

Section Title

 

 

 

 

 

Adapter

 

 

 

 

 

Column Title

 

Function

 

Legal Values

Adapter

Adapter Name

 

 

N1, N23

Protocol

Specify protocol used

 

SNMP

 

This

parameter

can

be

 

SNMP_Community*

configured if it is

required

that

Any string up to 255 characters,

“Community” be a different name

Public

 

 

in order to receive traps.

 

 

Example

 

 

 

 

 

//Server Side Connections

Adapters

 

 

Adapter,

 

Protocol

N1,

 

SNMP

5.3.Server Side Node Descriptors

Section Title

 

 

Nodes

 

 

Column Title

Function

Legal Values

Node_Name

Provide name for Node

Up to 32 alphanumeric

characters

 

 

Protocol

Specify protocol used

SNMP

Example

//Server Side Nodes

Nodes

 

Node_Name,

Protocol

Agent 1,

SNMP

5.4.Server Side Map Descriptors

No Server Side Map Descriptors are required by SNMP for Get or Set requests, since the mapping of FieldServer Data Arrays into the SNMP OID addressing scheme follows the method outlined in Section 5.1 above. Server Side Map Descriptors are required to configure SNMP TRAPS as outlined in Appendix A.

Scaling on Client side is per normal model but on Server side, normal model only applies if a Map Descriptor is used.

3Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 9042 Toll Free: (888) 509 1970 email: support@fieldserver.com

Page 12
Image 12
FieldServer FS-8704-09 SNMP instruction manual Server Side Node Descriptors, Server Side Map Descriptors