FieldServer FS-8704-09 SNMP instruction

-

A Sierra Monitor Company

Driver Manual

(Supplement to the FieldServer Instruction Manual)

FS-8704-09 SNMP Version 1

APPLICABILITY & EFFECTIVITY

Effective for all systems manufactured after September 2008

Driver Version:	1.03
Document Revision:	8

Image 1

FieldServer FS-8704-09 SNMP instruction manual Driver Manual FS-8704-09 Snmp Version, Applicability & Effectivity

Contents

Applicability & Effectivity Driver Manual FS-8704-09 Snmp Version Table of Contents FS-8704-09 Snmp Driver Manual Snmp Description Integer Octetstream Timerticks StringMax Nodes Supported Required 3rd Party Hardware Station FS-8704-09 Snmp Driver Manual Hardware Connections3rd Party Nodes non-SNMP 3rd Party Client Snmp Traps Data Arrays/Descriptors Snmp FS-8704-09 Snmp Driver Manual Client Side Node Descriptors Timing Parameters Driver Related Map Descriptor ParametersRDBC, WRBC, Wrbx Snmpoid DAAI3 Rdbc FS-8704-09 Snmp Driver Manual Map Descriptor ExampleDAAI3 Wrbx OID SNMPDA1 Server Side Data ArraysSNMPDA2 Server Side Map Descriptors Server Side Node Descriptors Appendix A.1.1. Trap Source IP Address DAAI3 Page FS-8704-09 Snmp Driver Manual Snmpoid 192.168.1.174 Status Normal Status LO Alarm Status HI Alarm Status Normal Status Alarm SNMPDA2 Snmptrap Appendix A.2.2. Polling for Integer bound Data Trap Map Descriptors are then configured as below Page TRAP-TYPE from RFC-1215 FIELDSERVER-MIB Definitions = Begin Snmp Comparison of Style2 to Style3 Comparison of Style1 to Style3 Sample Configuration File Style1 MIB File based on above configuration Style2 MIB File based on above configuration Style3 MIB File based on above configuration Style3 Traps Description Page FYI INTFYI MIB Trap ERR Snmptypeseq FS-8704-09 Snmp Driver Manual State=%s FS-8704-09 Snmp Driver Manual UINT32