First Alert FA168CPS, FA148CP manual Output Definitions

✱80 OUTPUT DEFINITIONS

Fill in the required data on the worksheet below and follow the programming procedure in the installation manual as you enter the data during the displays and prompts that appear in sequence.

Notes: 1. For Relays, 4229 and 4204 devices are programmed in *79, *80, and *81 modes.

2.For Powerline Carrier devices (plcd), field ✱27 must be programmed with a House Code.

3. Tampers of expansion units cannot be used to operate devices.

Output		Activation Type and Detail					Partition	Event (for zone list/activated by)			Action	Output	Device
Function		Activated by	Zone List	Zone Type	Zone No.		Number		By Zone List	By Zone No.	0 = off	Number	Type
Number		0=delete	(ZL)	(ZT)	(ZN)		(P)				1 = close 2 secs
(FA168CPS:		1=zn list	1-8 = list	(see table	00=none		(if using ZT trig)	0 = restore		0 = restore	2 = stay closed	FA168CPS:	R = relay
1-48)		2=zn type		below)	FA168CPS:		0 = any	1 = alarm		1 = alrm/flt/trbl	3 = pulse	1-18	T = trigger
(FA148CP:		3=zn no.			01-64		1 = partition 1	2 = fault			4 = toggle		X = X10
1-24)					FA148CP:		2 = partition 2	3 = trouble			5 = duration 1††	FA148CP:
					01-06, 09-34,
							3 = common				6 = duration 2††	1-8, 17, 18
					49-56
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
	ZONE TYPE/SYSTEM OPERATION – Choices for Zone Types are:
	00 = Not Used		05 = Trouble Day/Alarm Night			10 = Interior w/Delay			24 = Silent Burglary
	01 = Entry/Exit#1		06 = 24 Hr Silent			12 = Monitor Zone			77 = Keyswitch
	02 = Entry/Exit#2		07 = 24 Hr Audible			14 = Carbon Monoxide			81 = AAV Monitor Zone
	03 = Perimeter		08 = 24 Hr Aux			16 = Fire w/Verification			90-91 = Configurable
	04 = Interior Follower		09 = Fire			23 = No Alarm Response

Choices for System Operation are:
20	= Arming–Stay	38	= Chime	52	= Kissoff
21	= Arming–Away	39	= Any Fire Alarm	54	= Fire Zone Reset
22	= Disarming (Code + OFF)	40	= Bypassing	58	= Duress
31	= End of Exit Time	41	= **AC Power Failure	60	= AAV Trigger
32	= Start of Entry Time	42	= **System Battery Low	66	= Function key†
33	= Any Burglary Alarm	43	= Communication Failure	67	= Bell Failure
36	= **At Bell Timeout***			68	= TELCO Line Fault
				78	= Keyswitch red LED†††
				79	= Keyswitch green LED†††

Note: In normal operation mode:

Code + # + 7 + NN Key Entry starts Device

Code + # + 8 + NN Key Entry stops Device

**Use 0 (any) for Partition No. (P) entry.

***Or at Disarming, whichever occurs earlier.

†Use *57 Menu mode to assign the function key. †† Duration is set in program field *177.

††† Device action not used for these choices.

– 11 –