First Alert FA148CP, FA168CPS manual Download Information 94, Pager Options 160, 167, 169

Part. 1 Part. 2 common [0,0,0]

[15]

NOTE: Do not enter “0” if using FA4285/FA4286 Phone Module.

✱92 PHONE LINE MONITOR ENABLE

UL: see Inst. Instructions for requirements

[0,0]

1 2

NOTE: Output Device must either be programmed to be STOPPED in field ✱80 or STOPPED by Code + # + 8 + output number.

Entry 1:: 0 = disabled, 1-15 = 1 min - 15 min

(#+10 = 10 min; #+11 = 11 min; #+12 = 12 min; #+13 = 13 min; #+14 = 14 min; #+15 = 15 min)

Entry 2:

0 = Keypad display when line is faulted

1 = Keypad display plus keypad trouble sound

2 = Same as “1”, plus programmed output device STARTS. If either partition is armed, external sounder activates also.

✱93	No. OF REPORTS IN ARMED PERIOD	[1]
	PER ZONE (Swinger Suppression)

0 = Unlimited Reports; 1 = 1 report; 2 = 2 reports UL: must be “0”

SIA Installations: Must be set for option 1 or 2.

DOWNLOAD INFORMATION (✱94, ✱95)

✱94 DOWNLOAD PHONE No.

Enter up to 20 digits, 0–9; #+11 for '✱'; #+12 for '#'; #+13 for a 2-second pause. Do not fill unused spaces. If fewer than 20 digits, exit field by pressing ✱. To clear entries from field, press ✱94✱. UL: downloading may be performed only if a technician is at the site.

✱95 RING COUNT FOR DOWNLOADING

∗96, ∗97 INITIALIZE/RESET DEFAULTS ∗98, *99 EXIT COMMANDS

PAGER OPTIONS (✱160- ✱172)

0 = Disable Station Initiated Download;

1–14 = number of rings (1–9, # +10 =10, # +11 =11,

# +12 =12, # +13 =13, # +14 =14);

15 = answering machine defeat (# +15 =15).

These are commands, not data fields. See page 2.

These are commands, not data fields. See page 2.

✱160 PAGER 1 PHONE No.

Enter up to 20 digits. 0–9; #+11 = '✱'; #+12 = '#'; #+13 = 2-second pause.

✱161 PAGER 1 CHARACTERS

✱162 PAGER 1 REPORT OPTIONS

Enter the optional prefix characters, up to 16 digits. 0–9; #+11 = '✱'; #+12 = '#'; #+13 = 2-second pause.

For each partition, select from the following options:

0 = no reports sent

1 = Open/closes all users

4 = All alarms and troubles

5 = All alarms / troubles, and open/closes for all users 12 = Alarms / troubles for zones entered in zone list 9 13 = Alarms / troubles for zones entered in zone list 9,

and open/closes for all users

✱163 PAGER 2 PHONE No.

Enter up to 20 digits. 0–9; #+11 = '✱'; #+12 = '#'; #+13 = 2-second pause.

✱164 PAGER 2 CHARACTERS

✱165 PAGER 2 REPORT OPTIONS

Enter the optional prefix characters, up to 16 digits. 0–9; #+11 = '✱'; #+12 = '#'; #+13 = 2-second pause.

[0,0,0] See field *162 for reporting options. Select for each partition (use zone list 10 if using options 12 or 13).

Part. 1 Part. 2 common

✱166 PAGER 3 PHONE No.

Enter up to 20 digits. 0–9; #+11 = '✱'; #+12 = '#'; #+13 = 2-second pause.

✱167	PAGER 3	CHARACTERS
			Enter the optional prefix characters, up to 16 digits.
			0–9; #+11 = '✱'; #+12 = '#'; #+13 = 2-second pause.
✱168	PAGER 3 REPORT OPTIONS			0,0,0]	See field *162 for reporting options. Select for each
			Part. 1 Part. 2	common	partition (use zone list 11 if using options 12 or 13).
✱169	PAGER 4	PHONE No.

Enter up to 20 digits. 0–9; #+11 = '✱'; #+12 = '#'; #+13 = 2-second pause.

✱170 PAGER 4 CHARACTERS

✱171 PAGER 4 REPORT OPTIONS

✱172 PAGER DELAY OPTION FOR ALARMS

Enter the optional prefix characters, up to 16 digits.
0–9; #+11 = '✱'; #+12 = '#'; #+13 = 2-second pause.
		[0,0,0]	See field *162 for reporting options. Select for each
Part. 1 Part. 2		common	partition (use zone list 12 if using options 12 or 13).
	[3]		0 = none, 1 = 1 minute, 2 = 2 minutes, 3 = 3 minutes
			This delay is for ALL pagers in the system.

– 6 –