Fisher & Paykel 4323 installation instructions Customising the wash cycles, To customise a cycle

Models: 4323

1 40
Download 40 pages 60.71 Kb
Page 20
Image 20

18

Customising the wash cycles

To customise a cycle

EXCELLENCE model only

You can program your Smart Drive™ to remember the wash options you prefer for each wash cycle. For instance, you may want to set the REGULAR cycle to a COLD wash or set HEAVY DUTY to include a SOAK.

1Press POWER.

2Press the wash cycle button. Hold down for 2 seconds.

You will hear 2 quick beeps and the wash cycle light will flash.

3Select your wash options (eg COLD wash, SOAK).

4Press the wash cycle again to store your customised cycle.

To change your customised wash cycle simply repeat these steps.

When you are customising a wash cycle you can shorten or lengthen the agitation time. To shorten the agitation time, press the ADVANCE button to reduce the number of wash progress lights.

To increase the agitation time keep pressing the ADVANCE button until all the wash progress lights are on (see page 12).

Note: unlike the FAVOURITE cycle you cannot customise a wash cycle to start at the RINSE or SPIN stage. On HEAVY DUTY and HAND WASH you can only decrease the wash time.

Fig.22 Customising a wash cycle

4323_NZ_AU_PAC_GW_MW_Washer_UG11.indd 18

8/10/09 2:45:26 PM

Page 20
Image 20
Fisher & Paykel 4323 installation instructions Customising the wash cycles, To customise a cycle