Nikon SB-600 Specifications, Bounce capability ON/OFF button, Ready-light, Battery type

Specifications

Bounce capability

ON/OFF button

Power source/ min. recycling time/no. of flashes (at M1/1 output)

Ready-light

Flash duration (approx.)

Mounting foot lock lever

Flash output- level compensation

Flash head tilts from 0° to 90° with click-stops at 0°, 45°, 60°, 75°, 90°; flash head rotates horizontally 180° to the left or 90° to the right with click-stops at 0°, 30°, 60°, 90°, 120°, 150°, 180°

•Press the b button for approx. 0.3 sec. to turn the SB-600 on or off.

•Standby function can be set.

Four AA-type penlight batteries (1.5 V or lower) of any of these types: Alkaline-manganese (1.5 V), Lithium (1.5 V), Nickel (1.5 V), NiCd (rechargeable, 1.2 V), or Ni-MH (rechargeable, 1.2 V)

Battery type	Min. recycling	Min. number of flashes/
	time (approx.)*	recycling time (approx.)*
Alkaline-manganese	3.5 sec.	200/3.5–30 sec.
Lithium	4.0 sec.	400/4.0–30 sec.
Nickel	2.5 sec.	180/2.5–30 sec.
NiCd (1000 mAh) (rechargeable)	2.9 sec.	90/2.9–30 sec.
Ni-MH (2000 mA) (rechargeable)	2.5 sec.	220/2.5–30 sec.

*With fresh batteries.

•M1/1 output without use of AF-assist illuminator, zoom operation, and LCD panel illuminator.

•Lights up when the SB-600 is recycled and ready to fire.

•Blinks for 3 sec. when flash fires at its maximum output, indicating light may have been insufficient (in TTL auto flash mode)

1/900 sec. at M1/1 (full) output 1/1600 sec. at M1/2 output 1/3400 sec. at M1/4 output 1/6600 sec. at M1/8 output 1/11100 sec. at M1/16 output 1/20000 sec. at M1/32 output 1/25000 sec. at M1/64 output

Provides secure attachment of SB-600 to camera’s accessory shoe using locking plate and mount pin to prevent accidental detachment.

–3.0 to +3.0 EV in increments of 1/3 steps in the TTL auto flash mode.

90