3 Attach the SB-600 to the camera and adjust

1 Make sure the SB-600 and camera body are turned off.

2 Rotate the mounting-foot lock lever to the left, slide the SB-600’s mounting foot into the camera’s accessory shoe and turn the lock lever to the right.

3 Hold down the flash head tilting/rotating lock-release button to adjust the flash head to the horizontal/front position.

4 Turn on the SB-600 and the camera body.

• The zoom-head position is automatically adjusted according to the lens focal length when the SB-600 is used with cameras compatible with CLS, digital SLRs not compatible with CLS, cameras in Groups I to II in combination with a CPU lens, and COOLPIX cameras compatible with i-TTL.

• When the SB-600 is used with cameras other than those listed above, or you want to adjust the zoom-head position manually, refer to “Setting the zoom-head position” (p. 40).

22

Page 28
Image 28
Nikon user manual Attach the SB-600 to the camera and adjust