Nikon SB-600 user manual Installing the batteries, Usable batteries

1 Installing the batteries

1 Slide the battery chamber lid in the direction of the arrow to open.

2 Install the batteries following the i and j marks as shown. Close the battery chamber lid by sliding it into place while pressing down.

vUsable batteries

Install four AA-type penlight batteries (1.5 V or lower) of any of these types:

(1) Alkaline-manganese (1.5 V) (2) Lithium (1.5 V) (3) Nickel (1.5 V)

(4)NiCd (rechargeable, 1.2 V)

(5)Ni-MH (Nickel Metal Hydride) (rechargeable, 1.2 V)

•When replacing batteries, replace all four with fresh ones of the same brand.

•Carbon-zinc batteries are not recommended for use with the SB-600.

•Always carry extra batteries when travelling.

•For details on batteries, refer to “Notes on handling batteries” (p. 86).

CAUTION!

•Do not use batteries not specified in this user’s manual, as this may cause them to explode, leak corrosive liquids or catch on fire.

•Do not mix battery brands or types, or use old with new batteries, as they might explode, leak corrosive liquids or catch on fire.

•Do not place non-rechargeable batteries in a battery charger, as this might cause them to leak corrosive liquids or generate heat.

18