Close-up flash operation

1 Set the camera’s exposure mode to Aperture- Priority Auto (A) or Manual (M).

2 Set the camera’s metering system to Matrix Metering Y or Center-Weighted Metering W.

3 Set the SB-600’s flash mode to TTL auto flash.

4 Gently pull out the built-in wide-flash adapter and position it over the flash head.

The zoom-head position is automatically set at 14 mm when using the built-in wide-flash adapter.

To slide the wide-flash adapter back into place, lift and push it into the flash head as far as it will go.

5 Confirm that the ready-light is on, then shoot.

• When the flash has fired at its maximum output and underexposure may have occurred, the ready-light on the SB-600 blinks for approx. 3 sec. To compensate, use a wider aperture or move closer to the subject and reshoot.

76

Page 82
Image 82
Nikon SB-600 user manual Close-up flash operation, Confirm that the ready-light is on, then shoot