Fisher & Paykel CAD-30, CAD-48, CAD-36 manual Gas Hookup LP, Cover Hanger

Models: CAD-30 CAD-48 CAD-36

1 56
Download 56 pages 7.86 Kb
Page 10
Image 10

INSTALLATION

CART ASSEMBLY INSTRUCTIONS

STEP 5

Gas Hookup - LP

Attach LP gas line connector hose assembly (as shown in “LP Gas Hookup” section - The Professsional Liberty Collection, Use/Care Guide) and then connect to LP tank as shown.

Fig. 15

Fig. 16

 

FOR YOUR SAFETY

To prevent personal injury or damage to the drawers, do not overload them. The maximum rating of each drawer is 35 pounds.

WARNING!

Do not push down on the top of the drawers. The unit could tip forward.

COVER HANGER

To use the cover hangers provided, first place the cover hanger into the slot on the side or rear of your Cart (Fig. 17). Then hang the cover in either direction. (Fig. 18 or 19).

Note:

Do not move the cart while the covers are hung. This could cause the covers to fall off the hangers and damage the covers.

Cover hanger

Fig. 17

Fig. 18

Fig. 19

8

Page 10
Image 10
Fisher & Paykel CAD-30, CAD-48, CAD-36 manual Gas Hookup LP, Cover Hanger