INSTALLATION
SINK DRAIN ASSEMBLY INSTRUCTIONS (OPTIONAL)
WARNING!
Beware of pinch points and sharp edges to avoid injury to arms and hands.
B. Install the bracket tab on both sides of the appliance head using 8 of the
9.Place head onto cart (2 persons required)
A.Remove drip tray/pan (Fig. 41) and other removable components (to lighten the load) such as grates, top burner caps and components for easier handling.
B.Two persons required to lift head. To place the head on cart, place rear of head over the rear of the cart first (Fig. 42), then allow the rear side tabs to first locate in the slots on the top of the cart sides. The other tabs will locate in the middle and front slots as the head is lowered into position on the cart (Fig. 43).
Fig. 39
SCREWS
Fig. 40
Fig. 41
TABS
Fig. 42 | Fig. 43 |
14
