Fisher & Paykel CG363MLD manual Alert codes, To clear the alert code and fix the problem

US CA

22Alert codes

Your CookSurface can self-diagnose and then communicate this information to you.

If there is a problem, the CookSurface will: shut one or all burners off

beep every three seconds flash one or more lights

display an alert code on the control display(s). If only one burner has a problem, then its control display will show the alert code. If the whole CookSurface has a problem, then all the control displays will show a code (in most cases).

To clear the alert code and fix the problem

1Make a note of which burner(s) display an alert code and the number of bars displayed. You will need this information.

2Turn the power to the CookSurface off at the wall.

3Wait 30 seconds, then turn the CookSurface back on again.

4Check the chart following to see if you can fix the problem yourself.

5a If you can fix the problem and the alert code does not reappear, you can keep using your CookSurface.

OR

5b If you can’t fix the problem yourself or the problem persists, turn the CookSurface off and call your Authorized Service Center or Customer Care with the alert code information.

Note: if a burner is hot, the CookSurface will wait for the burner to cool before shutting down.