Fisher & Paykel CG905 installation instructions Final checklist, Installation instructions

Models: CG905

1 36
Download 36 pages 43.24 Kb
Page 19
Image 19
Final checklist

Installation instructions

17

Final checklist

TO BE COMPLETED BY THE INSTALLER

Have you securely fastened the cooktop to the bench with the supplied brackets?

All models except CG905DWAC: Have you used the supplied elbow (and conical adaptor if required) and fibre washer(s) to connect the gas to the inlet on the cooktop?

Have you leak-tested all connections?

Are the injector sizes correct for the gas type?

Is the shut-off valve on the gas supply accessible to the customer?

Is the power supply isolating switch accessible to the customer?

Is the cooktop power supply cable plugged into an earthed outlet?

Check the entire length of the power supply cable: it should not touch any hot metal parts.

Have you removed all protective film from the stainless steel surfaces?

Have you disposed of all packaging elements?

OPERATION:

Do all burners light individually and in combination?

Do the burners remain lit when turned quickly from maximum to minimum?

Are the flames consistent, free from any yellow tipping and appropriately sized?

Have you demonstrated the basic operation to the customer?

Installer’s name:

Installer’s signature:

Installation company:

Date of installation:

LEAVE THESE INSTRUCTIONS WITH THE CUSTOMER

Page 19
Image 19
Fisher & Paykel CG905 Final checklist, Installation instructions, To Be Completed By The Installer