28
Care and cleaning
Brass wok burner (CG905DWAC models only)
Each part of the brass wok burner has locating pins to help you to assemble it correctly after cleaning. See Fig.23 below.
Note: the brass parts of your wok burner will change colour with use. However, this will not affect performance and you can clean the brass parts with a brass cleaner.
Inner cap
Outer cap (small holes)
Trim ring
Vent ring with locating pins 
(large holes)
Side view
Rotate vent ring to align locating pin with hole in burner base.
Align and insert pin
Fig.23 Correct positioning of brass wok burner parts (CG905DWAC models only)
