Changing the pre-set options

End of programme beeps

The beeps at the end of each wash programme can be removed by following the steps below.

1Press the POWER button to turn the Dishwasher off.

2Press the ECO button and while holding down, press the START/PAUSE button and hold together for approximately five seconds until you hear one short beep.

3Release the two buttons and the “beeps” are now removed.

If you wish to re-instate the beeps at the end of the wash programmes, repeat the steps above.

16

Page 18
Image 18
Fisher & Paykel DW920, DW820 installation instructions Changing the pre-set options, End of programme beeps