Fisher & Paykel DW820 Water does not flow, Taps turned off, Water spots, streaks or, Foaming

Problem	Possible cause	What to do
Water does not flow.	Taps turned off.	Check the taps are turned
		on.

Inlet hose bent or kinked.

Straighten the inlet hose so that water can flow through.

Water spots, streaks or	Incorrect rinse aid setting.	Check that there is rinse aid
film on glassware.		in the dispenser (see Rinse
		aid section).
	Dishwasher overloaded or	Follow the instructions for
	loaded incorrectly.	proper loading. Remember
		to remove food scraps.
Foaming.	Rinse aid setting too high or	Turn the rinse aid dial to a
	has been spilled.	lower setting or wipe the spill.
	Incorrect detergent.	Ensure that you use a
		detergent that is intended
		for a domestic automatic
		dishwasher.
	Egg yolk.	Place an extra tablespoon of
		detergent in the dishwasher
		door for pre-rinsing.
	Too much detergent.	Use the recommended
		quantity of detergent.
Dishes not dry.	Incorrect loading.	Moisture can be trapped if
		items are too closely loaded.
		Ensure the dishwasher is not
		overloaded.
	Rinse aid supply depleted.	Refill the rinse aid dispenser
		if the indicating window is
		clear.
Detergent not dispensing.	Detergent dispenser lid not	Check that there is nothing
	opening.	obstructing the opening of
		the dispenser lid.
	Dispenser was wet when	Dry the detergent dispenser
	detergent is loaded.	before loading to prevent
		detergent caking.
	Blocked spray arms.	Remove spray arms, shake,
		and rinse under water
		before replacing (see Care &
		cleaning section).
	Over filling the detergent	Use the recommended
	dispenser.	quantity of detergent.

21