Fisher & Paykel OB60 installation instructions First use, Shelf positions

Models: OB60

1 40
Download 40 pages 21.99 Kb
Page 16
Image 16
First use

14

First use

Before using your new oven, please:

1Read this user guide, taking special note of the ‘Safety and warnings’ section.

2Remove all accessories and packaging. Make sure you peel the protective film off all surfaces.

3Set the clock. The oven will not work until the clock has been set.

See ‘Oven controls and setting the clock’ for instructions.

4Condition the oven:

Slide in the shelf/shelves and grill tray as shown in Fig.13 below. Fit them between the metal wires of the side racks, with the safety stop notch down and at the back.

If you have catalytic panels and sliding shelf supports, make sure these are fitted too. See ‘Care and cleaning’ for instructions if they are not already fitted.

Heat the oven on maximum temperature for the times below (see ‘Using your oven’):

60 minutes using Shelf positions

30 minutes using Manual background

15 minutes using Manual backgroundManual background

Note: some of these functions may not be available in some models.

There will be a distinctive smell during the conditioning. This is normal, but make sure your kitchen is well ventilated.

5Once cooled, wipe out the oven with a damp cloth and mild detergent, and dry thoroughly.

Shelf positions

4

4

3

3

2

2

1

1

Fig. 13 Correct position of shelves and grill tray - full and compact ovens

Page 16
Image 16
Fisher & Paykel OB60 installation instructions First use, Shelf positions