28
Care and cleaning
Removing and refitting the sliding shelf supports (some models only)
Important!
Remove the side racks first to make removing the sliding shelf supports easier. When refitting the sliding shelf supports, make sure that you fit
the side racks first
the slides to the top wire of a shelf position. They do not fit on the lower wire both sides of each pair of slides
both slides on the same level.
Notes:
In some full ovens, you cannot fit the slides to the topmost shelf position.
In a compact oven, you can only fit the slides on the wire immediately below the side rack fixing screws.
1
Unclip
2
1
Clip on |
Fig.22 Removing the sliding shelf supports | Fig.23 Refitting the sliding shelf |
supports - full oven cavity