Fisher & Paykel OB90 Troubleshooting, Problem, Possible causes, Self Clean function, What to do

Troubleshooting

Problem Possible causes What to do

35

Self Clean function

During a Self Clean	This is normal: the oven’s cooling fans operate at their highest speed.
cycle, the oven is louder
than usual.
The display shows	The door has not been properly	Make sure you close the door
door.	closed.	properly.
The display shows	The oven door is locked because	Wait until the Self Clean cycle
0:00 but the oven door	the oven is still too hot to be used	has finished. If you cancelled a
will not open.	for cooking.	Self Clean cycle which was

already underway, the oven still needs to cool down before it can be used. The oven door will automatically unlock.

At a point during a Self Clean cycle, the function dial halo goes out

and the temperature indicator starts displaying cascading

bars .

This is normal: the oven is in the last phase of the Self Clean cycle, cooling down.

Wait until the Self Clean cycle has finished. A long tone will sound and the oven door will automatically unlock when the oven is ready to use.

I have cancelled a Self		This is normal: if the function dial	Wait until the cool-down phase
Clean cycle but cannot		halo is unlit, you have	has finished. A long tone will
use the oven:		successfully cancelled the	sound and the oven door will
the oven door will not		Self Clean cycle. However, the	automatically unlock when the
open		oven is still too hot to be	oven is ready to use.
the display is still		used for cooking and	Note: depending on when the
		needs to cool down.	Self Clean cycle was cancelled,
counting down
			the cool-down phase may take
minutes or showing
			up to 45 minutes.
0:00
the Self Clean
function indicator is
still lit
the temperature
indicator shows
cascading bars
the dials and buttons
are unresponsive.
The oven is beeping and See section ‘Alert codes’ for instructions.
the display shows	or
A3.