34
Troubleshooting
Problem | Possible causes | What to do |
General
The oven has reached the set temperature but the temperature dial halo is still red (indicating that the oven is not ready to use).
This is normal: when heating up from cold, your oven is designed to initially heat to a temperature somewhat higher than what you have set. This is to provide optimal baking conditions right from the start.
Wait until a long tone sounds and the temperature dial halo turns white: the oven will then be ready to use.
The oven is heating but | The oven is set to ‘Display off’ |
the display is dark. | option. |
To quit the ‘Display off’ option, press and hold the cancel button until the display shows the time of day.
The oven is in Sabbath setting.
To quit Sabbath setting, press and hold the cancel button until the display shows the time of day.
The oven cancels | The oven was set for automatic | You can only adjust the clock | |
automatic cooking when | cooking when you were trying to | setting while the oven is not | |
I try to adjust the clock | adjust the clock setting. | set for automatic cooking. See | |
setting. |
| section ‘Setting the clock and | |
|
| first use’ for instructions. | |
|
|
| |
The oven beeps | This is normal: for food safety | The temperature dial itself | |
when I try to turn the | reasons, the oven functions have | cannot be ‘turned off’. Selecting | |
temperature dial OFF | Off | with the function dial | |
or below a certain | settings. | will turn the oven off. | |
temperature. |
|
|
|
|
| ||
The temperature dial | This is normal: the halo stays red to indicate that the grill element | ||
halo never turns white | provides instant radiant heat. |
|
|
when I use Grill . |
|
|
|
The rotisserie skewer will The skewer did not fully engage in
not rotate. | the rotisserie drive. |
| The meat is too heavy. |
Make sure the skewer is pushed fully into the rotisserie drive hole.
To get a finish similiar to a rotisserie for pieces of meat or poultry heavier than 6 kg, use the grill tray and rack and the Fan Forced function.
The rotisserie skewer stops rotating when I open the door.
This is normal: the rotisserie drive is disabled while the door is open.