Page 10 of 21
WR 3M
1.Select the desired channel ┌ 1 ┐, ┌ 2 ┐ or ┌ 3 ┐ for entering the special functions.
2.Depress and hold down the UP and DOWN Scroll Keys simultaneously.
"– 1
3.Release the Scroll Keys.
Menu 1 is activated and the special functions can now be selected.
-Select menu items with Radio Buttons ┌ 1 ┐(back), or ┌ 2 ┐ (forward).
-Exit the menu with Radio button ┌ 3 ┐ (EXIT).
Setting the Standby Temperature
When the Setback time has elapsed, the “Set” temperature
is decreased automatically to the Standby value. The “Read” temperature is displayed (flashing) and "STANDBY" appears in the display. The Standby temperature can be set in the range ( 200 - 600°F / 100
1.Select the menu item STANDBY in Menu 1.
2.Set the value for the Standby Temperature with the UP or DOWN Scroll Key.
3.Proceed to the next menu item with the Radio Button ┌ 1 ┐ (back) or ┌ 2 ┐ (forward) or exit the menu with Radio button ┌ 3 ┐ (EXIT).
Setback Time
When the soldering tool is not in use, the temperature is reduced to the Standby temperature after the Setback Time has elapsed. The Setback is indicated by a flashing actual value, (see note) and "STANDBY“ appears in the display. Depressing the UP or DOWN scroll key terminates this Setback Time. Depending on the tool, the finger switch or the switching holder resets the Setback Time.
Note: When using the HAP 1 or HAP 200, the Actual Temperature will not be displayed for these tools.
The following Setback settings are possible:
−"0 min“: Setback OFF (factory setting)
−"ON“: Setback ON (the system is controlled down to the Standby temperature when the soldering tool is placed in the switching holder).
−
1.Select the menu item SETBACK in Menu 1.
2.Set the Setback value with the UP or DOWN Scroll Key.
3.Proceed to the next menu item with the Radio Button ┌ 1 ┐ (back) or ┌ 2 ┐ (forward) or exit the menu with Radio button ┌ 3 ┐ (EXIT).
Note | Assigning a low |
| possibility of manual temperature reduction (Setback) when the |
| soldering / desoldering tool is not in use. |
