Cooper Lighting Radio manual Special Functions, Switching the Vacuum Pick-up Pump ON/OFF

WR 3M Page 9 of 21

2.The current air flow in percentage is shown in the display for approximately 2 seconds.

3.Set the desired flow by Depressing the UP or DOWN Scroll Key.

6.4Switching the Vacuum Pick-up Pump ON/OFF

ZDepress the Pick-UpRadio Button.

	The pump is switched on or off, depending on the initial state. In
	switched-on mode, the LED (8) next to the Pick-UpRadio Button
Note	lights up green.
	The vacuum pump is not designed for continuous operation. (60
	Seconds On, 30 Seconds Off). To protect itself, the pump
	switches off automatically after 5 minutes of continuous operation.

2 s ➾	Menu 1
4 s ➾	Menu 2
1x ➾	ON/OFF

6.5Soldering and Desoldering

ZPerform the Soldering / Desoldering work in accordance with the operating instructions of your connected soldering tool.

7 Special Functions

The special functions are divided into 2 menu levels:

−Menu 1 with setting options for Standby temperature, temperature deactivation (Setback), automatic switch-off time (AUTO-OFF), temperature Offset, Window function, Degrees °F / °C conversion, switch-on time (On Time) for hot-air pencil, vacuum OFF delay (VAC OFF), vacuum ON delay (VAC ON) and Lock function.

−Menu 2 with setting options for Station Desoldering vacuum level, ID code, Factory Control Check (FCC), and Pick-Up vacuum level

(%).

Selecting Menu 1 Special Functions

Special functions

STANDBY SETBACK AUTO OFF OFFSET WINDOW °F / °C

ON TIME VAC OFF VAC ON

Navigation

↑┌ 1 ┐

↓┌ 2 ┐

EXIT ┌ 3 ┐