FISHER & PAYKEL WASTE DISPOSAL -
INSTALLATION INSTRUCTIONS
IMPORTANT
Before you start to install your FISHER & PAYKEL Waste disposal please read all of these instructions carefully. This set of instructions is general: local building codes take precedence over the instructions in this guide and your installation must conform to the building codes in your area. Be sure to retain this set of instructions for future reference.
TOOLS REQUIRED FOR INSTALLATION
You may need the following tools and supplies when installing your disposer: (ILLUSTRATION #1)
Pipe wrench | Hacksaw | Plumber’s Rod | Phillips Screw Driver |
Rubber Mallet | Electrical Switch |
| (20 amp rating) |
- 3 -
