3.Slide the waste pipe flange on to the waste pipe.
4.Attach the rubber gasket to the waste pipe so that the thin lip is facing the disposer. (ILLUSTRATION #14)
5.Insert the
6.Use the screw to tighten the waste pipe to the disposer.
7.Rotate the disposer so that the waste pipe lines up with the drain trap. (ILLUSTRATION #16).
8.Once the waste pipe is lined up use a pipe wrench to tighten the slip nut on the drain trap. ILLUSTRATION #17).
9.If fitted to a double sink, the use of separate traps for the disposer and the sink are recommended.
10.Make sure that the hinged clamp is locked firmly in place.
- 7 -
ILLUSTRATION #14
ILLUSTRATION #15
ILLUSTRATION #16
ILLUSTRATION #17
