10
Installation instructions
Levelling your washer
It is IMPORTANT to level the washer to ensure good spin performance and effective detergent and bleach dispensing.
1Separate the 4 rubber foot inserts from the moulding and fit into the feet on the base of the washer.
2Move the washer to its final position. (We suggest a minimum clearance of 1” (25 mm) each side).
3Adjust the feet so the washer is level and cannot rock.
1” (25 mm) 1” (25 mm)
Adjustable feet
Rubber insert
Fig.5 Levelling your washer | Fig.6 Minimum clearances |
4Use the walls and adjacent counter tops as a sight guide to check to see if washer appears level. Readjust the feet if necessary.
5Open the lid and check the washer tub to see that it sits slightly forward of centre. (See Fig. 7).
IncorrectCorrect
adjustmentadjustment
Fig. 7
6Turn on the water and check all hose connections for leaks. Make sure there are no kinks in the hoses.
7Uncoil power cord and plug into wall socket.
8Check for leaks, noise, vibration, correct water temperatures and proper operation in spin. Check that the lid locks during spin.
