Fisher & Paykel WL37T26D installation instructions Aqua Rinse, End of Cycle beeps

30

Changing pre-set options

Aqua Rinse
	Rinse Options
On the High Efficiency cycles you can	Bleach light on	Double Aqua Rinse
	Bleach light off	Aqua Rinse
change the pre-set rinse option.
The pre-set rinse option on these cycles
is a water efficient Aqua shower rinse.
This rinse can be doubled to provide
a more intensive rinse for people with
sensitive skin.

1Enter the Option Adjustment mode (refer to page 28).

2Press BLEACH to change to a double Aqua rinse.

3Press POWER to save your selection.

End of Cycle beeps

The number of beeps that signal the end of the cycle can be altered. Choose between no beeps, five or fifteen beeps. The DELAY START button adjusts the cycle signal setting.

End of Cycle Beeps

1hr light	No beeps
3hr light	5 beeps
9hr light	15 beeps

1Enter the Option Adjustment mode (refer to page 28).

2Press the DELAY START button to adjust the cycle signal setting.

3Press POWER to save your selection.