The unique AquaSmart™ wash
The AquaSmart™ washer has two modes of washing, High Efficiency and Conventional. Both modes start the same way, with a Detergent Activating wash.
Detergent Activating wash |
|
AquaSmart™ fills the bowl at the selected water temperature, |
|
with just enough water so the clothes are saturated. This small |
|
amount of sudsy water flows through the clothes, up a specially |
|
designed portal and back onto the clothes in a waterfall effect. This |
|
thoroughly dissolves and activates the detergent. | Fig.7 Detergent Activating wash |
High Efficiency mode |
|
In the High Efficiency mode the AquaSmart™ then fills with just |
|
enough cool water to lift the clothes off the low profile agitator so |
|
when it rotates, the clothes gently roll over each other. This wash |
|
uses similar quantities of water to most Front Loaders. Not only |
|
do you get the benefits of water savings but the higher detergent |
|
concentrations give you optimum soil removal. | Fig.8 High Efficiency wash |
|
Conventional mode |
|
The Conventional mode is the immersion wash all Top Loader users |
|
are familiar with. After the Detergent Activating wash the AquaSmart™ |
|
fills with cold water until the clothes are submerged, and gently turns |
|
the clothes over. We recommend this mode when the dilution effect |
|
of water can solve or prevent common wash problems. For example, |
|
when dye or colour run can be a problem, or when washing sandy |
|
towels. The SHEETS cycle uses the Conventional mode. | Fig.9 Conventional wash |
|
Some cycles can be used in both modes, whilst others work in only one.
Regular
Heavy
Delicate
Sheets
Colours
Bulky
Easy Iron
High Efficiency | Conventional |
–
–
–
–
These two wash modes mean that your AquaSmart™ washer gives you the best of both worlds, to suit any laundry situation.
