26
Caring for your AquaSmart™ washer
Cleaning your low profile agitator
If your low profile agitator becomes stained we recommend you use household bleach to clean it. Ensure you wear gloves, tip a small amount of household bleach onto a soft cloth and apply to the stain. Be careful to avoid metal surfaces of your machine. Leave it to soak in for 10 minutes and repeat. Then put your AquaSmart™ washer through an AUTO CLEAN cycle to remove any residual bleach (refer to page 25).
Automatic lint disposal system
With AquaSmart™ there is no need to remove messy lint filters. Your AquaSmart™ has a self cleaning lint disposal system. It automatically separates the lint from the wash water as it washes. The lint becomes trapped between the inner and outer bowls and is flushed out at the end of the wash.
Nappy sanitisers/bleach
Nappy sanitisers and bleach are very corrosive to metal surfaces. DO NOT use your AquaSmart™ to soak items in bleach or sanitiser, or tip the contents of the nappy bucket into your machine. Rinse and wring items out thoroughly before placing them in the machine. For cloth nappies, wring out, place into the washer and select BULKY cycle. Using the ADVANCE button, advance the cycle to RINSE and press START. After the cycle is complete, wash nappies as normal.
