Customising the wash cycles

To customise a cycle

19

You can program your AquaSmart™ to remember the wash options you prefer for each wash cycle. For instance, you may want to set the Regular cycle to a cold wash.

1Press POWER.

2Press the wash cycle button.

3Select your wash options, (eg. cold wash).

4Press and hold down the wash cycle button for 2 seconds, until you hear a beep. This will store your customised cycle for future washes.

To change your customised wash cycle simply repeat these steps.

Note: You will be unable to customise a wash cycle to start at the rinse or spin stage.

Fig.13 Customising the wash cycle

Page 21
Image 21
Fisher & Paykel WL80T65D, WL70T60D installation instructions Customising the wash cycles, To customise a cycle